DIGITAL CONTROL UNIT
| AD
2950 |
230V |
Ref. 2950200 |
| |
120V |
Ref.
2950100 |
|
Digital control unit AD 2950 is the basic
control unit that allows operation alternatively with a 20w or
50W soldering iron, covering all electronics soldering
requirements.
The stand for the soldering iron is integrated with the control
unit and is “intelligent” which means it is aware when the
soldering iron is in the stand and reduces the temperature,
remaining in the “sleep cycle”. The stand incorporates a tip
extractor/inserter, which allows the use of two types of tip.
For temperature control and other characteristics, a
microprocessor is used enabling the AD2950 to offer a high
productivity and the lowest cost of ownership ever.
Sleep mode, Hibernation mode, lock out of parameters by PIN, are
all included in this highly competitive soldering station. |
| SPECIFICATIONS: |
 |
Power 75W |
|
|
Total peak power 140W |
|
|
Nominal soldering iron power: 20W or
50W |
|
|
Temperature selection between 90 and
450 ºC / 190 and 840 ºF. |
|
|
Antistatic control box with “skin
effect”. |
|
|
weight 2,4 kg / 5.3 lb |
For a complete soldering station the following is needed: |
|
|
Control unit. |
|
|
Any iron handpiece. |
|
|
Any cartridge corresponding to its
iron handpiece. |
|
 |
|
