SINGLE CONTROL UNIT
| AD
2700 |
230V |
Ref. 2700200 |
| |
120V |
Ref.
2700100 |
Control unit AD 2700 is the basic
control unit that allows operation alternatively with a
20w or 50W soldering iron, covering all electronics
soldering requirements.
The stand for the soldering iron is integrated with the
control unit and is “intelligent” which means it is
aware when the soldering iron is in the stand and
reduces the temperature, remaining in the “sleep cycle”.
The stand incorporates a tip extractor/inserter, which
allows the use of two types of tip.
For temperature control and other characteristics, a
microprocessor is used enabling the AD2700 to offer a
high productivity and the lowest cost of ownership ever.
|
| Note:
The AD 2700 does not allow for any hot tweezers to be
connected. |
| SPECIFICATIONS: |
 |
Power 75W |
|
|
Total peak power 140W |
|
|
Nominal soldering iron power:
20W o 50W |
|
|
Temperature selection between
200 and 752ºF / 100 and 400 ºC. |
|
|
Antistatic control box with
“skin effect”. |
|
|
|
For a complete soldering station the following
is needed: |
|
|
Control unit. |
|
|
Any iron handpiece. |
|
|
Any cartridge corresponding to
its iron handpiece. |
|
 |
|
|
Click here to see the AD 2700 kits |
|
|
|
Manual - 100V / 120V / 230V -
Last Update: 18/09/2006
|
|
|
Exploded view - 100 V-
Last Update: 18/09/2006
|
| |
Exploded view - 120V-
Last Update: 18/09/2006
|
| |
Exploded view - 230V -
Last Update:18/09/2006
|
|
|
Electric wiring diagram - 100V/120V /230V-
Last Update: 18/09/2006
|
|
|
Cartridges range - VERSION 1
|
| |
Cartridges range - VERSION 2 -
Last Update: 27/06/2005 |
|
|
|
